Cold Room Calculator

Refrigeration load and capacity · SI units

Design inputsExample assumptions — replace with project data
Calculation method and limitations

Daily thermal energy is divided by net available refrigeration hours. Required capacity is the larger of daily recovery and the one-batch deadline check, with the design allowance applied once.

Batch deadline: background energy / available hours + batch energy / (deadline × available hours / 24). This assumes uniform availability and background duty; verify actual coincident operating schedules.

    The example uses 20 refrigeration hours, 8 hours of occupancy and lighting, and no additional outdoor-air supply. These are planning assumptions.

    Calculated quantities
    QuantityValueUnit
    What changed from the supplied workbook
    • One room setpoint and a target-temperature consistency check.
    • Moist-air ventilation loads and subzero psychrometrics.
    • Separate batch mass, stored inventory and product freezing enthalpy.
    • Daily schedules, net refrigeration hours and a batch deadline check.
    • Explicit additional ventilation prevents automatic duplication of door exchange.
    • Validation, traceable calculations and identical methods across Excel and both web versions.