Vapor-compression refrigeration cycle
Follow refrigerant through the four main components. Select a process for its state change and energy balance.
Refrigeration circuit schematic
Pressure–enthalpy (p–h) cycle
Conceptual schematic, not a refrigerant property chart. No numerical pressure or enthalpy scale is implied. The dashed saturation boundary is illustrative.| State | Location | Typical condition |
|---|---|---|
| 1 | Compressor inlet | Low-pressure vapor, normally superheated |
| 2 | Compressor outlet | High-pressure, hot superheated vapor |
| 3 | Expansion-valve inlet | High-pressure liquid, commonly subcooled |
| 4 | Evaporator inlet | Low-pressure liquid/vapor mixture |
Idealized steady cycle: negligible line pressure loss, adiabatic compressor and valve, and negligible kinetic/potential energy changes. Evaporation and condensation are shown at constant pressure; expansion is isenthalpic. Real equipment has pressure losses, heat leaks and refrigerant-specific behavior.
Cooling COP = (h₁ − h₄) / (h₂ − h₁) · Heat rejected = cooling absorbed + compressor work under these assumptions. A numerical p–h chart requires a named refrigerant and a validated property model.